Learn To Drive A Regular Gear Car With These Easy Steps!

Turbo October 27, 2021 October 27, 2021
to read
Description: How to drive a regular gear car in easy steps To learn how to drive a regular gear car, it is necessary to follow the following:
-A A +A


Learn To Drive A Regular Gear Car With These Easy Steps!
Learn to drive a regular gear car

How to drive a regular gear car in easy steps

To learn how to drive a regular gear car, it is necessary to follow the following:

Learn to standby

Making sure to adjust the mirrors and side, In addition to the seat can be adjusted so as to reach the pedals easily. 

Learn to use spare parts

The clutch pedal must be pressed before starting to shift between gears, so that it is shifted to the neutral position before starting the car, then use the palm of the hand on the side far from the driver on the side of the gear hand with the direction of the thumb down, followed by a movement to the left, then forward and then to the first gear.

By holding the position of the palm of the hand and holding the gear hand towards the left and then moving it backwards, the transition to the second gear, and so on.

Learn to start and drive

This is by pressing the clutch pedal with the left foot and moving the gear lever to the neutral position, then turning the key to start the car and raising the parking brake, followed by shifting the gear lever to first gear simultaneously with pressing the clutch pedal.

Upon the arrival of the speed of the engine rotation rate of 1,500 to 2,000 rpm slowly lift the foot pedal clutch the car to start in the forward movement. 

Learn how to change direction of movement and control speed

To do this, you must check the mirrors and signal the desired direction, then reduce the speed and switch to the first gear in the event of entering a narrow road or going up, and the speed of the car is controlled through the clutch; The car moves while relieving the pressure on it, and its speed increases by relieving the pressure more.

Learn how to go back

The driver must turn his head and shoulder and watch the mirrors to ensure that the surroundings of the car are clear of any obstructions, then press the clutch pedal with the left foot and move the gear lever backwards while placing the right foot on the accelerator pedal without doing any movement.

Then put the left hand on the center of the steering wheel and turn to see the rear circumference of the vehicle and then slowly lift the left foot off the clutch pedal and depress the accelerator pedal at the same time, while continuing to move the car to continue in reverse. 

How to stop a normal gear car

While teaching to drive a normal gear car, there is a need to park somewhere, and once the car is in an appropriate position to stop it, the following steps are followed:

  • Take the right foot off the gas pedal and depress the clutch pedal.
  • Shift the gear lever to the neutral position.
  • Lift the left foot off the clutch pedal and apply the right foot to the brake pedal.
  • Continue to depress the brake pedal until the parking brake is applied.
  • Lift the parking brake and then remove the foot from the brake pedal to bring the car to a stop.

common mistakes when driving a regular gearbox that you must avoid!

Many are accustomed to learning to drive ordinary gear with time and practice, with the need to avoid common mistakes that negatively affect the car, and cost the driver the trouble of repairing it. The following are the most common mistakes that drivers make:

Using the clutch pedal when standing at a traffic light

Frequent use of the clutch pedal when standing on the red signal, can lead in the long run to the wear or damage of the components of the clutch permanently, and therefore it is preferable to move the gear lever to the neutral position. 

Using the manual transmission as a handrest

One of the most prominent mistakes that a regular gear car driver makes is the belief that the manual transmission or gear lever is designed to support the hand while driving, and what many may not know is that this, in turn, leads to premature damage to the transmission forks (English: Transaxle shift forks) Bend it and cut it.

Use a quick gear when the car is slow

The use of quick gear in the car while its movement is slow affects it significantly, and over time it works on its stress and the emergence of continuous noise resulting from the great pressure on the engine.

Rest your foot on the clutch pedal

The displacement of the foot on the clutch pedal causes the pressure plates to rub against the wheel, which leads to its burning and costs the driver a high price to repair, accompanied by a significant decrease in power.

Use the clutch pedal to stand on heights

Using the clutch pedal as a way to stand on the hills is an unsuccessful option, as this makes the clutch pedal rotate at one speed while the pressure plate in the engine rotates at another speed, which causes the friction material on the clutch to wear out or damage it completely.

Depressing the throttle and clutch together

Pressing the clutch pedal disconnects the engine from the manual transmission, and pressing the accelerator pedal accelerates the engine, and thus pressing them together is nothing but acceleration of the engine by increasing the rotational speed without increasing the revs, which causes you to malfunction. It does not rotate when running at a faster speed.

Tips and advice when learning to drive regular gear

It is not easy for a lot of drivers to master the normal lime leadership of what it takes to switch gears manually and choose the most appropriate ones with mobility by pressing on the pedals, but always there are tips and instructions to improve driving skills , and the following are some of them a statement:

  • Not using the phone while driving to reduce the chances of accidents. Driving regular gear cars requires the presence of one hand on the steering wheel and the other on the gears to shift between gears.
  • Depress the clutch pedal using the left foot before shifting gears, and use the right foot to apply both the gas pedal and the brake pedal.
  • Stop the engine if the car comes to a stop while pressing the brake pedal, then depressing the clutch pedal and adjusting the gear lever to the first gear, followed by lifting the foot off both pedals to ensure the car is stable.
  • Using the first three gears to drive on city roads with intermittent traffic, and using both the fourth and even the sixth gear on highways.
  • Feet depress the brake pedal and clutch pedal while shifting the gear lever to the neutral position to stop on a hill or incline.

Share this post

You may like these posts

Post a Comment